#How to setup os x server install#
#How to setup os x server plus#
#How to setup os x server windows#

dhcp_enabled – Used to enable dhcp for each network interface.First, it updates the /etc/ist property list, which looks something like this (note the correlation between these keys and the settings in the above screen shots.:

Each time you make a change, the change updates a few different things.

#How to setup os x server windows#

the server you’re setting up right now) that you renew all leases on client systems, most easily done using a quick reboot, or using “ipconfig /release” on a Windows computer. If you have problems with leases not renewing in OS X, check out this article I did awhile back. Also, make sure that there are no overlapping scopes and that if you are moving a scope from one device to another (e.g. Once started, verify that a new client on the network gets an IP. Once you’ve build all required scopes, start the service.

#How to setup os x server plus#

Click the minus sign button to remove any data in these fields and then click on the plus sign to enter new values.Ĭlick OK to save DNS settings and then OK to save each scope. For example, if we use and we have a DNS record for then we could just type wiki into Safari to bring up the wiki server. The search domain is the domain name appended to all otherwise incomplete Fully Qualified Domain Names. The DNS settings in the DHCP scope are really just the IP addresses to use for the DNS servers and the search domain. DNS: Use the Edit button for DNS to bring up a screen that allows you to configure the DNS settings provided as part of each DHCP scope you create, taking note that by default you will be handing out a server of 0.0.0.0 if you don’t configure this setting.Note that while in DHCP you don’t actually have to use a gateway, OS X Server does force you to do so or you cannot save changes to each scope. 1 address for the subnet used in the Starting and Ending IP address fields. Router: The default gateway, or router for the network.

This setting determines the size of the network.

Subnet Mask: The subnet mask used for the client configuration.

Ending IP Address: The last IP address used in a scope.

For example, if you configure a scope to go from 192.168.210.200 to 192.168.210.250 you would have 50 useable IP addresses.

Starting IP Address: The first IP address used.

Keep in mind that you can tag multiple VLANs on a NIC, assign each an interface in OS X and therefore provide different scopes for different VLANs with the same physical computer and NIC.

Network Interface: The network interface you’d like to share IPs over.

This is how long a lease that is provided to a client is valid before the lease expires and the client must find a new lease, either from the server you’re configuring or a different host.

Lease Duration: Select an hour, a day, a week or 30 days.

Name: A name for the scope, used only on the server to keep track of things.

To configure a scope, double-click on the first entry in the Networks list.Įach scope, or Network, will have the following options: You’ll also see an ON and OFF switch, but we’re going to configure our scopes, or Networks as they appear in the Server app, before we enable the service. Then click on DHCP.Īt the DHCP screen, you’ll see two tabs: Settings, used for managing the service and Clients, used to see leases in use by computers that obtain IP address information from the server.

#How to setup os x server install#

To install the service, open the Server app and then click on the Show button beside Advanced in the server sidebar. It’s pretty transparent, just as DHCP services should be. The DHCP Server built into OS X Server 5, installed on El Capitan or Yosemite is easy-to-use and fast. DHCP, or Dynamic Host Control Protocol, is the service used to hand out IP addresses and other network settings by network appliances and servers.